• <track id="6savd"><div id="6savd"></div></track>
      <track id="6savd"><div id="6savd"></div></track>
      <menuitem id="6savd"><strong id="6savd"></strong></menuitem>
      1. <tbody id="6savd"></tbody>

      2. <progress id="6savd"></progress>

        Product Center

        Contact Us

        Ningbo Jinting Cable Co., Ltd

        Contact person: Liu Jilin (Sales Manager)

        Mob:013586703933

        Tel:0574-62125116

        Fax:0574-62125117

        Add:Industrial Zone of Simen Town, Yuyao, Zhejiang Province

         

        News

        Current Location:Home > News >

        The outer diameter of wire should conform to the process car

        Date of issue:2020-08-04 08:49 Click:

        2.1.0 conductor structure and surface quality
         
        2.1.1 requirements: the structure and number of conductors shall meet the process requirements, and the surface shall be smooth and free from warping, oxidation, oil contamination and other defects.
         
        2.1.2 inspection method: the structure and number of conductors shall be checked by reading, and the surface quality shall be inspected by visual inspection.
         
        2.2 insulation outer diameter and core deviation
         
        2.1 requirements: the outer diameter of insulation shall meet the requirements of process card, and there shall be no obvious core deviation defect.
         
        2.2 inspection method: during production, each head should be inspected. The external diameter of insulation should be measured with an external micrometer with a scale of 0.01mm and 0-25mm. The deviation of core should be carefully checked by visual inspection.
         
        2.3 surface quality of insulated wire
         
        3.1 requirements: the insulation should be solid, smooth and round, with uniform color, no particles on the surface, no pores on the cross section, serious thickness and other defects.
         
        3.2 test method: check carefully with visual inspection method.
         
        2.4 sheath dimension and core deviation
         
        4.1 requirements: the overall dimension of sheath shall meet the requirements of process card, and there shall be no obvious core deviation defect.
         
        4.2 inspection method: during production, each head should be inspected. The external dimension should be measured with an external micrometer with a scale of 0.01mm and 0-25mm. The core deviation should be carefully checked by visual inspection.
         
        2.5 sheath surface quality
         
        5.1 the sheath shall be extruded firmly, smooth and flat, with uniform color, no particles on the surface, no pores on the section, no serious thickness and no serious pitch.
         
        5.2 test method: check carefully with visual inspection method.
         
        2.6 power cord plug lettering
         
        6.1 requirements: the words on the surface of wires and cables must be legible.
         
        6.2 test method: check carefully with visual inspection method.

        嗯…啊熟乳岳怀孕好深,亚洲 日韩 欧美 综合 热,fuck chinese 沈阳熟女,久久久久久人妻精品一区